Best Power Shaper Cutters Comparisons and Specifications


Bosch TS1013 Dado Cutter Insert GTS1031

Bosch

7.6
  • Dado Cutter Insert for Bosch GTS1031 only
  • Dado insert for use with stack dado and rabbet cutters
  • Accommodates up to 1/2-inch stack
  • Leveling capability to table top
  • ITEM PACKAGE QUANTITY : 1
  • COLOR : Red
  • PRODUCT DIMENSIONS : 18 x 5 x 0.3 inches
  • ITEM WEIGHT : 1.19 pounds
  • PART NUMBER : TS1013
  • SHIPPING WEIGHT : 1.25 pounds

Honda Electronics ultrasonic cutter USW-334 From import JPN

Honda Electronics

6.2
  • 5g,13.4x7.1x12.7cm
  • ■ protection device thermostat
  • ■ cleavable resin ABS · PP · PET · acrylic
  • ■ cleavable thickness 3mm below
  • ITEM PACKAGE QUANTITY : 1
  • COLOR : Mineral Gray
  • PRODUCT DIMENSIONS : 5.3 x 2.8 x 5 inches
  • ITEM WEIGHT : 1.19 pounds
  • PART NUMBER : USW-334
  • SHIPPING WEIGHT : 1.81 pounds
  • BATTERIES REQUIRED : No
  • BATTERIES INCLUDED : No
  • NUMBER OF PIECES : 1
  • WATTAGE : 20 watts
  • VOLTAGE : 100 volts
  • POWER SOURCE : ac
  • MATERIAL : ABS \xc2\xb7 PP \xc2\xb7 PET \xc2\xb7 acrylic

15mm x 15mm x 2.5mm -30 Degree Carbide Cutter Insert

JTEX

  • Replacements Carbide Cutter Insert 15mm x 15mm x 2.5mm -30* Cutting angle.
  • The 4 cutting edges have the 30 degree corners are chamfered. Easy to change the cutting edge or replace.
  • Spiraled Stagger tooth to break up chips for dust collection, Helix to assist the chip flow, Shear to give clean cutting action , Shear on each knife for true helical cut, Clearance between knives for chip flow, Inexpensive 4 sided replaceable carbide, Unbelievably quiet
  • If you happen to plane a nail or staple, it is not necessary to replace knives the full length of your planer head. Rotate or replace the two or three small knives that were affected, and you are ready to get back to work.
  • The packed and priced in 10 pc one box.
  • ITEM PACKAGE QUANTITY : 10
  • ITEM WEIGHT : 2.4 ounces
  • SHIPPING WEIGHT : 2.4 ounces
  • BATTERIES REQUIRED : No
  • BATTERIES INCLUDED : No
  • MATERIAL : Carbide
  • PACKAGE DIMENSIONS : 3.9 x 2 x 1.2 inches

14mm Carbide Inserts Cutters Knives Replacement Square Straight 14mm x 14 x 2mm

Asieg Tool

8.6
  • Standard Size-14mmX14mmX2.0mm square straight with 4 edges,30 degree cutting angle
  • Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness
  • 10 pieces per box,packed with a plastic container for safe and easy storage
  • Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
  • Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners
  • PRODUCT DIMENSIONS : 0.6 x 0.6 x 0.1 inches
  • ITEM WEIGHT : 3.2 ounces
  • SHIPPING WEIGHT : 3.2 ounces
  • BATTERIES REQUIRED : No
  • BATTERIES INCLUDED : No
  • MATERIAL : Tungsten Carbide
  • SIZE : 14mm x 14 x 2mm

Freud EC-240 Drawer Lock Joint Shaper Cutter

Freud

6.2
  • Thick micrograin carbide tips
  • Kickback reducing design
  • Covered by Freud's limited lifetime warranty
  • ITEM PACKAGE QUANTITY : 1
  • ITEM WEIGHT : 7.2 ounces
  • PART NUMBER : EC-240
  • SHIPPING WEIGHT : 7.2 ounces
  • MATERIAL : N/A
  • PACKAGE DIMENSIONS : 5.8 x 3.6 x 1.5 inches
  • STYLE : Drawer Lock Joint Shaper Cutter, 3/4 Bore

Grizzly Industrial C2004

Grizzly Industrial

10.0
  • 5000-10,000 RPM, 15,000 max
  • Package dimensions: 2.8" x 3" x 2.1"
  • Approximate weight: 0.25 lbs
  • ITEM PACKAGE QUANTITY : 1
  • PRODUCT DIMENSIONS : 2.8 x 3 x 2.1 inches
  • ITEM WEIGHT : 0.32 ounces
  • PART NUMBER : C2004
  • SHIPPING WEIGHT : 0.32 ounces
  • BATTERIES REQUIRED : No
  • MATERIAL : carbide

CMT 694.011.31 45 degree Lock Miter Cutter Head

CMT

2.0
  • Heavy duty aircraft aluminum body, manual feed, pins for automatic knife positioning.
  • Manual feed, pins for the automatic positioning of the knives.
  • Accurately create boxes, stretcher bars, frames and any right angle or parallel joint projects.
  • Excellent results in most materials but ideal in solid wood & in coated/uncoated man made materials.
  • RPM between 5500 and 9500.
  • ITEM PACKAGE QUANTITY : 1
  • PRODUCT DIMENSIONS : 2.6 x 11.8 x 8.7 inches
  • ITEM WEIGHT : 8.8 ounces
  • PART NUMBER : 694.011.31
  • SHIPPING WEIGHT : 3.8 pounds
  • BATTERIES REQUIRED : No
  • BATTERIES INCLUDED : No
  • SIZE : Cutter Head - B 1-1/4 | D 5-1/2 | CL 1-1/8

OSCARBIDE 2-3/8 inch Carbide Inserts Cutter 60mm 2 Edges Knives Scrapers

OSCARBIDE

10.0
  • Rectangle Insert knives Size: 2.4" x 1/2" x 3/50"
  • Oscarbide Inserts made of solid tungsten carbide making it the most durable, and polished to a mirror finish for smoother cutting and longer tool life
  • 2-Edge Indexable blades make it changing the knives faster with lesser downtime.
  • Suitable for wood surfacing / planing cutterheads, groovers, helical planer cutter heads, and other woodworking applications.
  • 10 pieces per box,packed with a plastic container for safe and easy storage
  • PRODUCT DIMENSIONS : 2.4 x 0.5 x 0.1 inches
  • ITEM WEIGHT : 5.4 ounces
  • SHIPPING WEIGHT : 5.4 ounces
  • BATTERIES REQUIRED : No
  • BATTERIES INCLUDED : No
  • MATERIAL : carbide
  • THICKNESS : 1.5 millimeters